The PUK D6 -
the dental welder
The PUK D6, is a compact and versatile dental welderdesigned specifically for applications and alloys in dental technology and orthodontics. All everyday welding tasks in a dental laboratory that can otherwise only be carried out with a laser can be performed with this dental welder. Take a look for yourself at the various possible applications in our Application videos!
The PUK D6 is appreciated worldwide by dental technicians, orthodontists and dental laboratories for its ease of use and reliable results. We have put all our experience from over 20 years impulse welding combined in this device, making it the perfect, cost-effective alternative for dental welding tasks everywhere.
The dental welder at a glance
- The display of the PUK D6 with high color brilliance and transparent display of the performance parameters
- Clear design language with timeless aesthetics as a visual highlight at every workstation in the dental laboratory
- Noble, selected materials for highest demands on value and appearance
- 70 % higher display resolution with increased viewing angle under all ambient conditions on the new Lampert PUK D6 dental welding unit
- Optimum welding curves for all common available dental alloys
- Higher maximum power and improved welding performance – especially with highly conductive alloys – thanks to the new speed function
- New standby function – fast restart, minimal energy consumption
- Single-screen menu for intuitive and fast selection of the right performance parameters through direct control with one-hand joystick with turn-push-tilt function
- Faster maximum spot weld sequence due to extended speed function – selectable in 3 levels
- Refined micro mode with narrower gradation enables extended spectrum when welding at the lower power limit, e.g. in orthodontics
- Newly designed, patented welding process control for avoiding faulty welds and learning PUK welding even faster
| Amperage (TIG) min./max. | 9 – 630 A |
| Pulse duration (TIG) min./max. | 0.1 – 34 ms |
| Amperage (fusion welding) min./max. | 80 – 700 A |
| Pulse duration (fixation welding) | 1.5 ms |
| Welding speed | up to 3 Hz |
| max. Loading time | 0,8 s |
| Number of metal programs | 10 |
| Range display with recommended settings | + |
| High frequency welding | + |
| automatic gas pre-flow time | + |
| Gas consumption | approx. 2 l/min |
| Inert gas | Argon > 99.9 % e.g. argon 4.6 |
| Power consumption during welding | 400 VA |
| Power consumption in float mode | 7 W |
| Weight | 10.4 kg |
Fields of application for dental welding
- Dental laboratory
- Dental technician
- Orthodontist
Welding of
- Dentures
- orthodontic appliances
- orthodontic wires
- orthodontic bands
- Bridges
- Implant bars
- Model casting clamps
- Crowns
- Brackets
- Retentions
Applications:
- Welding, repairing and delating removable cast partials
- Fabricating telescopic prostheses (German crowns)
- Hybrid welds
- and much more
Welding of
- High gold alloys
- Gold-reduced alloys
- Silver-palladium alloys
- Palladium-based alloys
- Nickel-chromium alloys
- Cobalt-chromium alloys
- Stainless steel
- Titanium
The PUK D6 dental welder in practice
Here you can see our product video with a short presentation of the new PUK D6 for dental technicians and orthodontists. It presents the advantages and innovations of the new generation of Lampert devices – see for yourself!
PUK welding in the dental laboratory
- Extremely short welding pulse times enable high-quality welded joints to be made with the new dental welder on workpieces < 0.15 mm material thickness
(e.g. e.g. in orthodontic constructions) as well as in heat-sensitive areas (e.g. e.g. in the vicinity of plastic or ceramic parts). - Thanks to the wide performance spectrum of the PUK D6, stable dental welded joints can also be produced on very solid parts such as bridges, bars and model cast prostheses.
- It is recommended to use appropriate welding wires for this purpose
- “Blind operation” thanks to one-handed operation: the focus always remains on the workpiece.
- Even more powerful LED lighting in our new Premium welding microscopes. More uniform illumination of the working area – more flexible use of the microscope: these microscopes can also be used as fully-fledged working microscopes
- New: Setting of all functions, the parameters power, pulse duration and menu navigation with only one joystick rotary control
- Individual welding device setup via the settings menu
- Very low, controllable heat generation
- Low acquisition costs for the PUK D6 dental welding unit – also ideal for smaller dental laboratories and independent dental technicians and orthodontists
- Very good price-performance ratio
- Facilitation and time savings during repairs and soldering
- Low costs for consumables
- Low argon consumption
- Maintenance free technology
The advantages of the PUK D6 dental welder speak for themselves
Strong and long-lasting heat exposure during conventional TIG welding or brazing with the flame is often undesirable or intolerable in dental technology. The new Lampert PUK D6 dental welder not only saves time, but also avoids unnecessary material consumption.
In contrast to soldering, fine welding with the PUK D6 uses alloys of the same type and thus avoids any unnecessary mix of materials.
This ensures biocompatibility both in the manufacture and repair of dental restorations.
When precision, reliability and controllability are required, the PUK D6 is the first choice, making it the ideal complement to CAD/CAM design and additive processes as well as classic casting techniques.
In addition to the classic TIG micro-pulse welding technique, the PUK D6 also offers the practical and proven retention welding function for fast and stable denture repairs or extensions.
- Simple, time-saving and inexpensive procedure for welding stable retention pins
(Ø 1.2 – 2 mm) onto existing dentures in just a few seconds – for repairs, extensions or new fabrications. - In a fraction of a second, a special adapter is used to create an extremely stable connection – without any significant heat development on the denture.
- No re-welding and no post-processing of the weld or its surroundings necessary. As a result, cast partial repairs or extensions can be completed much faster for the dental technician than with conventional techniques.
- Help for safe work with difficult workpiece constructions
- Simple activation: Press the foot switch for 3 seconds – blue symbol appears in the display – welding is now triggered by pressing the foot switch, similar to laser welding.
- Very simple and efficient method for fixing dental workpieces for final welding or soldering. E.g. for a fixation weld of a separated bridge or other dental prosthesis on the working model or to fix wire and construction elements for orthodontic appliances.
- Joining of two metal parts at their point of contact by means of resistance welding – the parts can thus be tacked together for final joining by means of PUK fine welding, or to fix them for a soldering process.
- Especially suitable for machining metals with low electrical conductivity, e.g. stainless steel or titanium.
- Possibility of welding material thicknesses of even less than 0.2 mm, e.g. wires or orthodontic bands, in an even more controlled manner for very delicate dental restorations.
- A significantly faster welding cycle enables the dental technician to work even more continuously.
- Possibility to shape applied material as desired or also to greatly improve the fine welding properties of particularly thermally conductive dental alloys.
The operating concept of the new PUK D6
inspires dental technicians and orthodontists alike
Optimized settings menu of the PUK D6 dental welder with the option of quickly calling up practical additional functions such as the refined micro mode, the retention welding mode or the fixation welding function.
Basic functions are selected in just a few steps in the device settings.
- Intuitive, simple, ergonomic operation: Select metal – select welding situation – weld
! - Visualization of the optimum setting ranges for the selected welding task
- Presets for all common dental alloys
such as cobalt-chrome and high-gold alloys,
stainless steel, titanium and many more, as well as for typical welding situations in dental technology.
- Setting of the parameters power, pulse duration and menu navigation directly via the one-hand joystick of the PUK D6
- Easy to understand symbols with self-explanatory user interface
PUK D6 - Use in modern orthodontics
The specialist journal KIEFERORTHOPÄDIE NACHRICHTEN (issue 9/2023) from the publishing house OEMUS MEDIA AG has published an interesting specialist article which, among other things, also addresses the topic of micropulse welding.
Dr. Seung-Woo Yoo (Neu-Isenburg) and Dr. Matthias Himmelreich (Langen) will shed light on the topic of “Virtual design and fabrication of fixed orthodontic appliances”.
CAD/CAM techniques are now also revolutionizing the design possibilities in orthodontics.
In many cases, the use of a PUK D6 represents the ideal link between design on the screen and SLM (3D printing), casting or milling techniques for the welding of the final appliance.
Read the full article here (German language only) and see for yourself the possibilities of modern precision welding technology in orthodontics.
Practical additional system components and accessories such as electrode grinding motors, flow regulators and much more are available to suit your individual requirements. Please also visit our accessories page.
Scope of delivery of the PUK D6
The PUK D6 dental welder is supplied with the following accessories and contains all the necessary documentation
and instructions for the dental technician:
- 1 contact clamp, pin welding adapter set (Ø 1.2, 1.3, 1.5 and 2 mm), gas hose and power cord
Here you can download additional information about our dental welder
Quality for your demand: We place importance on the highest production and safety standards and guarantee the reliability of our products.
High-quality workmanship in every detail: fine, selected materials for the highest standards of value and appearance.
Special electrodes without toxic components, with optimized ignition and welding properties.
Ergonomic working: Individual adjustment of the working position and comfortable hand rests for low-fatigue work.
Single-screen display with high color brilliance and
transparent display of performance parameters.
High quality connectors and professional screw and plug-in connections ensure durability and lasting safety in daily use.
One-hand joystick with turn-push-tilt function and simplified, intuitive menu navigation
Quality “Made in Germany ”
PUK welding machines are developed and produced in Germany.
Quality by conviction
We provide a 3-year guarantee for PUK welding equipment!
Compliant with standards
Every PUK welding system is manufactured in accordance with the applicable EN standards and is CE-compliant.
UK-compliant
In addition to CE conformity, our welding equipment also complies with UKCA requirements for Great Britain.
The latest technology
Our long-standing collaboration with the University of Applied Sciences WÜ-SW guarantees innovation.
The official German ceritification authority for research and developent “Bescheinigungsstelle Forschungszulage” (BSFZ) awards its seal exclusively to companies that are eligible to claim funding through the research allowance.
