Welding fittings
1. the challenge
Furnitures often only have a small base, which does not provide much material for welding, so it is best to use a trick
2. more material
One or two drops of a welding wire of the same type are first applied to reinforce the weld.
(see WS 2)
Here we use a wire of 0.4 mm thickness, for which approx. 50% power is used.
3. milling
A small groove milled between the drops facilitates positioning and welding.
4. welding
Welding is now very easy.
The settings are adjusted depending on the thickness of the materials.
The joint mode makes joining parts even more reliable
5. secure hold
A few spot welds on two sides are completely sufficient for a permanent connection
6. weld the rotary axis
The rotary axes of moving parts can be welded well if you are careful.
7. serging
Various elastic threads are suitable for serging, for example.
