Ring width change
1. prepare the ring
Adjust the ring to the desired size and file in a V-shape.
2. weld the seam
First weld the seam as well as possible from the inside and outside without any additional material.
To prevent the edges from melting off, simply hold a wire of the same type or another piece of metal of the same alloy to the side of the ring.
This metal absorbs excess energy.
3. insert wire
Then place a gold wire of the same type with a maximum thickness of 0.4 mm in the joint and place the electrode next to and under the wire
4. insert welding material
Apply the welding material in layers as evenly and densely as possible.
5. fill the joint
Fill the joint until the inserted material protrudes approx. 0.3 to 0.5 m.
Also add material to the inside of the ring if necessary
6. post-processing
The compressor is now used to smooth the weld seam.
Bring the weld seam to the desired height as precisely as possible at high speed.
The seam is smoothed or polished with a polisher or emery file.
7. result
If the correct procedure is followed, a stable seam free of pores has now been created
