Jewelry making
The PUK 6 is a versatile and handy fine welding device that can be used in jewelry production in a similar way to laser welding.
Even with material thicknesses of just 0.2 mm, robust weld seams can be produced effortlessly.
With the PUK 6, numerous applications are possible in jewelry production, from the production of sheet metal or wire elements to the implementation of new creative designs.
Tutorials: Welding in jewelry production
Frame settings for square stones are held at the correct angle by a few welding points.
A white gold necklace with three stones set in yellow gold in the middle is to be redesigned.
The outer settings are to be removed and reworked into earrings, while the middle stone remains in the necklace.
To prepare for the weld, you can use the precision welder to create a thickening on the pin and then weld it to the ear jewelry.
With the PUK, fittings can be installed quickly and easily, even if they are very delicate.
Welding eyelets is easy with Lampert precision welding technology.
Setting stones is particularly low-risk with PUK welding technology.
The PUK can be used to weld parts that must not become hot, such as closures with springs.
Workpieces can be fixed with spot welds instead of binding wire or clamps before soldering
The angle and welding direction of the electrode guide are essential for a successful weld.
An external seam can be avoided by working on the back of the welding piece.
