Flow regulator
An indispensable accessory for all Lampert welding machines
Item no. 100 600
Product information
- PUK flow regulator:
An important prerequisite for reliable welding is the correct flow rate of the argon inert gas. - With the PUK flow regulator, the precise setting of the recommended 2 liters per minute is simple, but above all: > reliable!
- The flow controller is specially designed for the low gas flow rates in PUK welding.
Technical data
| Gas | Argon 4.6 |
| Max. inlet pressure | 230 bar |
| Adjustment range | 0 – 6 l/min |
| Weight | 1,4 kg |
Welding wire feeder "WIRE PEN"
With this brand new addition, you are always on the right track
Item no. 100 812
Product information
- For manual feeding of welding wire
- Ergonomic handle shape for fatigue-free working
- Rubberized guide wheels for perfectly controllable wire feed
- Suitable for all alloys and wire gauges in the Lampert welding wire range
- Color-codable for use of multiple wire pens with enclosed color-coding rings
- Highest quality – milled from solid aluminum
Electrode grinding motor
Electrode grinding improves your welding results
Item no. 100 858
Simple and fast grinding of the PUK electrodes
The grinding motor is a useful accessory for every PUK welding machine.
The maintenance of the electrode tips, which is important for very good welding results, is done in no time at all with the grinding motor.
Durable diamond grinding wheel
The diamond blade used has a long service life.
Replacement discs are available as accessories if required and can be easily changed using the enclosed hexagon key.
Simple and safe handling
To grind the electrode tips, the electrodes are held at a preset angle of 15° to the rotating diamond disc and rotated between the fingers. Guide holes are available in diameters of 0.6, 0.8, 1.0 and 1.3 mm. The diamond wheel is securely embedded in a sturdy aluminum housing so that only the face of the grinding surface is accessible.
Connection directly to the welder
Depending on the Lampert welder series, the grinding motor can be mounted separately or on the combined connection socket of the welder – if a foot switch is already in operation there, additionally with a T-plug (item no. 100 823). The motor is switched on with a button on the side of the housing.
Technical data
| Idle speed | 11000 rpm |
| Power consumption (12 V) | max. 6 W |
| Dimensions (Ø x L) | 34 x 76 mm |
| weight | approx. 200 g |
Foot switch
This accessory allows you to weld safely and efficiently
Item no. 100 850
Product information
- The practical addition for your PUK welding machine
In contrast to automatic welding, each individual welding process can also be triggered using the foot switch. Thus, in difficult welding situations an accidental release of the weld can be avoided. - Users who are used to working with a foot switch with other welding machines do not have to change.
T-connector
Practical for simultaneous connection of welding accessories
Item no. 100 823
Product information
- T-connector for PUK welding units for simultaneous connection of foot switch and electrode grinding motor or a welding microscope and the optics unit (LCD eye protection system).
Standard TIG glove
This accessory protects your hands during welding
Item no. 100 735/736/737*
Product information
- This standard TIG glove is made of very soft goat nappa leather and ensures a good feeling and high wearing comfort despite the best protection of the hands.
- The glove is recommended for PUK welding with higher power.
- *Available in size 8 (100 735), 9 (100 736), 10 (100 737)
Nappa leather glove
The best accessory for fine welding
Item no. 100 730/731/732*
Product information
- Highest tactile sensitivity, finest goat nappa leather and a back of the hand made of knitted fabric ensure a very good fit and high wearing comfort.
- Designed for use with PUK welding equipment, the
glove is intended for fine, low-power welding. For welding with higher power settings, please use our standard TIG gloves.
- *Available in size 7 (100 730), 8 (100 731), 9 (100 732)
Protective shield
Protect your eyes when welding with this essential accessory
Item no. 200 006
Product information
- For mounting on the welding microscope
- Extended face protection for welding with or without handpiece holding arm.
Flexible contact strip
Item no. 100 695
Product information
- The flexible contact strip is very suitable for contacting workpieces where the normal clamp cannot be used, or for very delicate as well as polished parts.
- Length 100 cm
Raw cable
Item no. 100 696
Product information
- The raw cable for the production of individual contacting tools
- Length 100 cm
Fixation welding set PUK 4.1 / PUK 5 / PUK 6 / PUK D6
Item no. 100 845
Product information
- The fixation welding set is required to use the function “fixation welding” .
- The set consists of foot switch and blue connection cable 100 cm with contact terminal.
Contact pliers
The indispensable welding tool
Item no. 100 500
Product information
- The flat peaked pliers are suitable for holding and safely contacting small parts.
- The pliers are nickel plated for optimum conductivity.
Handpiece tray
Item no. 100 112
Product information
- The handpiece tray is made of heavy solid rubber and ensures safe storage of the handpiece.
Argon nozzle 4 mm
Item no. 100 150-4
Product information
- This inert gas nozzle with a nominal diameter of Ø 4 mm has a nozzle opening that is 1.0 mm larger than the standard 3 mm nozzle.
- This nozzle is particularly advantageous when welding on edges or very filigree structures, as the wider gas flow better encloses such structures.
Display protection film
Item no. 100 145
Product information
- Screen protector
is a perfect fit for the PUK 5 display.
Headrest
Item no. 200 217
Product information
- The headrest for PUK welding microscopes enables relaxed and fatigue-free work with the welding microscope.
- Especially during longer welding tasks, the headrest helps to maintain concentration on the workpiece.
Art. No. 200 219
Replacement cushion made of natural felt
Microscope eyepieces 15x
Item no. 200 111
Product information
- For maximum precision when welding with PUK welding equipment.
The microscope eyepieces with 15x magnification are particularly recommended for very fine welding work where maximum precision is required. The eyepieces fit all Lampert welding microscopes and can be easily exchanged in just a few steps.
Technical data
| Magnification | 15x |
| Field of view | 13 mm |
| Packaging unit | 2 |
Transport case
Item no. 104 101 (for PUK 6)
Item no. 104 102 (for Micro Arc Welder)
Item no. 104 102 (for Micro Arc Welder)
Product information
- Our new transport case: the clever solution for safe transportation
or protected storage of your PUK 6 or Micro Arc Welder - High quality plastics tray with rubberized carrying handle
- Custom-fit foam inserts for welding machine, handpiece, cable, grinding motor, welding tools and accessories
- Additional storage box for other small parts such as electrodes, collets, welding wires …
Transport case for welding microscope
Part no. 104 103 (for SMM, SMG or SM 6)
Product information
- Our new transport case: the clever solution for safe transportation
or protected storage of your welding microscope - High quality plastics tray with rubberized carrying handle
- Precisely fitting foam inserts
- Additional storage box for other small parts and welding tools such as electrodes, collets, welding rods …
Downloads for PUK welding equipment
Here you can download additional information about our accessories for welding equipment, spare and wear parts
